400W 24V DC MOTOR XYD-6D Currie Technologies
With Mounting Bracket
24 volt 400 watt XYD-6D electric motor with an 11 tooth #25 chain bracket from Currie Technologies. This is the motor that was used on the chain drive versions of the Schwinn 400 and IZIP 400 electric scooters.
This motor uses a universal mounting bracket, and it can be used on most 24 volt electric scooters factory equipped with 200 watt to 400 watt motors.
Note: This motor is capable of rotation in either the clockwise or counterclockwise direction by reversing the motor's power wires.
Brand new with warranty.
- Motor for electric scooter can be used for mini bike quad and Go-Kart. It may also work for bicycle. Or do it yourself enthusiasts.
- 24 Volt 400 Watt motor from Currie Technologies.
- Standard base plate.
- This motor is capable of rotation in either the clockwise or counterclockwise direction by reversing the motor's power wires.
Currie Technologies part number: SD-4007-2 or XYDJ131002216
Model: XYD-6D Motor
Voltage: 24 volt DC
Rated Speed: 2600 RPM
Rated Current: 22 amp
Sprocket: 11 tooth #25 chain sprocket
Output: 400 Watts
Case Length: 3-13/16" (97 mm)
Case Diameter: 3-15/16" (100 mm)
Drive Shaft Length: 3/8" (10 mm)
Drive Shaft Diameter: 3/8" (10 mm)
Bolt Hole Distance (Adjacent): 3-3/4" (95 mm)
Bolt Hole Distance (Cross Bracket): 1-5/8" (42 mm)
- eZip E-4.0
- eZip E-400
- IZIP I-400
- Schwinn 4
- Schwinn S400
Please ask us if you need to know any specific dimensions for this motor so you can be sure it will work for you.
We also sell other electric scooter parts and mini Bikes
Most orders ship same day from our warehouse
Warranty: 30 days from purchase date. We will only replace motors that do not work out of the box. We test all motors before shipping. We will not replace burnt out motors.